SENSOR INPUT CONNECTIONS Figures
7-1 through 7-3 describe how to connect your sensors.
Figure
7-1
2-Wire RTD Input Connection
Figure
7-2
3-Wire RTD Input Connection
Figure
7-3
4-Wire RTD Input Connection
MAIN
POWER CONNECTIONS
Figure
7-4 shows the proper AC power main power connections. The J1 connection
is not active. WARNING: Do not connect
AC power to your meter until you have completed all input and output connections.
Failure to do so may result in injury!
Table 7-1 shows the
wire color and respective terminal connections for both USA and Europe.
AC
Power Connections Table 7-1
AC
POWER
WIRE
COLORS
EUROPE
USA
AC
Line
Black
Brown
AC
Neutral
Blue
White
AC
Ground
Green/Yellow
Green
Figure
7-4
Main Power Connections - AC
Figure 7-5
Main Power Connections - DC
ANALOG
AND RELAY OUTPUT CONNECTIONS
If you have purchased
a meter with analog or dual relay output, refer to the following output
connections
Home
TOC
Back
Next
WARNING:
Do not connect
AC power to your meter until you have completed all input and output connections.
Failure to do so may result in injury!
